Faq

I'm having problems using the screen block supplied in your screen printing kit. Can you advise?


The screen block should be at normal room temperature. Stir to get a thick creamy consistency. Have the screen raised above the work surface so that the screen is not in contact. Place the screen block all along 1 edge. Pull it across with the squeegie. You should be able to cover the screen in 1 pull. If you take more than 2 pulls, you'll probably load it too thickly.

Allow to dry, this should take about 1 hour. The colour will lighten. Wash out the drawing fluid with cold water and gently rubbing.

Subscribe to our Newsletter!

Join us on:Follow us on TwitterJoin the Daler-Rowney Facebook GroupAdd Daler-Rowney on PinterestSubscribe to the Daler-Rowney RSS FeedFollow Daler-Rowney on Google PlusSubscribe to the Daler-Rowney YouTube Channel

Find A Stockist

Where are you?